I have a Titan Controls Short Cycle Timer and have found it to be very reliable. The only thing about it that I dont like is the knobs. If you are not careful you can bump it and change the settings. It is a bit hard to calibrate also so I actually used a watch […]
RainForest 318 Aeroponic System Review
I have been using a RainForest aeroponic system from General Hydroponics for cloning and vegging and I wanted to share a review of my RainForest 318. This is an aeroponics deep water culture hybrid that produces excellent results. The RainForest is almost an exact copy of the Ein Gedi System, developed in Israel. Many people […]
Loc-Line Coolant Hose Component Tefen Coupling 1/8″ NPT Female (Pack of 4)
There have been problems with fit so this system is no longer recommended. The Loc-Line Coolant Hose Component Tefen Coupling 1/8″ NPT Female (Pack of 4) is a coupling for Tefen pipe fittings. It is 1/8″ NPT and can be used to change over male to female threads for tefen misting heads. Not recommended. I […]
John Guest Union Tee Fitting 1/4″ Tube OD (Pack of 10)
This John Guest union tee fitting has 3 female openings and takes 1/4″ OD tubing. Use them if your main line is 1/4″ to branch off and install your misting nozzles. These tees are also available for 3/8″ mainline which is what I recommend running. Details Union tee with female connections on all three ends […]
John Guest Reducing Branch Tee 3/8″ x 1/4″ x 3/8″ Tube OD
Use this John Guest reducing branch tee fitting if you are running 3/8″ OD mainline and want to reduce down to 1/4″ for your misting nozzles. This reducing branch tee fitting below is for 3/8″ x 1/4″ x 3/8″ Tube OD. [amzn_product_post]
- 1
- 2
- 3
- …
- 5
- Next Page »