The John Guest branch stem tee 1/4″ x 1/4″ x 1/4″ comes in a pack of ten. These fittings are great to use on your main line if you are using bulk head fittings and they are fairly cheap. If you use this stem tee and the 1/4 to 1/8 npt stem adapter with a […]
John Guest Fitting Stem Adaptor 1/4″ Stem OD x 1/8″ NPTF Male
Not recommended. I thought this would be a lower cost way to hook up tefen misting heads. There were reports that things don’t fit right. Use this push/fit misting tee instead: Use this John Guest Fitting Stem AdaptorĀ to go from a 1/4″ tee or reducing tee to a 1/8 NPT male. You can then […]
10 Micron 7″x16″ Singed Polyester Felt Filter Bag
I use this felt filter bag inside my reservoir. Because misting nozzles have such small orifices it is extremely important to keep any dirt or debris out of the water. The pores on this filter bag are 10 microns, by contrast a human hair is about 40 microns. The bag hangs on the inside of […]
High Pressure Aeroponic Fittings
These are the high pressure aeroponic fittings and tubing you will need to set up your misting head assemblies. You should use 4 misting heads in each tote. Locate them on the ends of the totes, 2 on each side. I use 3 rows of net pots so space them evenly on both sides of […]
John Guest Bulkhead Fitting – 1/4OD Bulkhead Union – 10 Pack
Use this John Guest bulkhead fitting on the end of your tote to stabilize the connection between your tee and your spray head. This 1/4″ bulkhead union comes in a pack of 10. Using The John Guest Bulkhead Fitting Is Highly Recommended You don’t absolutely need to use a bulkhead to connect between your tees […]